|
|
Universal measurement interface for digital audio signal
Gál, Marek ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This master’s thesis deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. The original design was created by Ing. Martin Stejskal, Polymorphic USB – I2S Interface. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension. This work describes and justify individual changes of hardware and software part of project.
|
|
|
Methodology of Determination of Electroinsulating Properties
Čanigová, Veronika ; Nevřivová, Lenka (referee) ; Sokolář, Radomír (advisor)
The core of this bachelor thesis is porcelain and electrical porcelain property specification accompanied by definition and explanation of electric conductivity. The theoretical section provides insight into electrical porcelain production from initial raw material exploitation to final stages of body baking. The experimental part compiles a number of electrical porcelain test methods based on current European standards and draft test procedures, which are followed in order to specify properties of conventional electrical porcelain as well as emerging anorthite porcelain based on aluminate cement.
|
|
|
Ventilation of a cytostatic laboratory
Kicko, Peter ; Štětina, Josef (referee) ; Charvát, Pavel (advisor)
The main goal of this thesis is an introducing and guiding the reader with all important aspects of a proposal of ventilation system for cytostatics laboratory, from theoretical knowledge about the issue via familiarization with an appropriate legislative statute, a demonstration of relevant calculations needed for the project, a proposal in the form of technical reports as well. In this thesis the process of validation, which is needed for installed technology in the cleanroom, is also described. The thesis is supported by drawing documentation of real ventilation project for cytostatics laboratory, which follows the aforementioned technical report and calculations.
|
|
|
Measurement of basic parameters of optical and optoelectronic components
Beneš, Pavel ; Látal, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.
|
|
|
Reconstruction of overhead power lines 110 kV
Krejčí, Tomáš ; Vašíček, Martin (referee) ; Lázničková, Ilona (advisor)
The master’s thesis deals with the topic new isolation lines of 110 kV. The aim is to propose new insulator hangers. The first, theoretical part focuses on the development of insulators, cutting and possibilities of application. They are the different materials that are used for the production of insulators HV, advantages and disadvantages long rod and cap and pin insulators. There are also described insulator hangers. The theoretical work is to describe thefittings for overhead transmission lines, which are, used to construct a insulator hanger. The last part of the theoretical work is intended distribution towers for overhead lines HV. The practical part deals with the design of new insulator suspensions for specific lines of 110 kV. The results are drawings newly designed hangers and a list of materials (fittings) for individual towers and the total amount of material. The practical part is calculating the differences in the conductor sag using old and new insulators hangers.
|
|
|
Crash test and its effect on cooling module design
Hačunda, Patrik ; Lapčík, Josef (referee) ; Bazala, Jiří (advisor)
Bakalářská práce se zabývá rešerší na téma „Crash test a jeho vliv na konstrukci chladícího modulu“. Práce obsahuje základní data Evropské legislativy, informace o společnostech provádějící nárazové testy, popis a funkce jednotlivých částí chladícího modulu a v neposlední řadě popis prvků kompenzující náraz v nízké rychlosti. Na základě předpisu společnosti RCAR je zpracována simulace čelního strukturálního nárazového testu.
|
|
|
Measurement of basic parameters of optical and optoelectronic components
Beneš, Pavel ; Látal, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.
|
|
| |
|
|
Methodology of Determination of Electroinsulating Properties
Čanigová, Veronika ; Nevřivová, Lenka (referee) ; Sokolář, Radomír (advisor)
The core of this bachelor thesis is porcelain and electrical porcelain property specification accompanied by definition and explanation of electric conductivity. The theoretical section provides insight into electrical porcelain production from initial raw material exploitation to final stages of body baking. The experimental part compiles a number of electrical porcelain test methods based on current European standards and draft test procedures, which are followed in order to specify properties of conventional electrical porcelain as well as emerging anorthite porcelain based on aluminate cement.
|
|
|
Universal measurement interface for digital audio signal
Gál, Marek ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This master’s thesis deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. The original design was created by Ing. Martin Stejskal, Polymorphic USB – I2S Interface. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension. This work describes and justify individual changes of hardware and software part of project.
|
guest ::
